Platinum 5500 R3-S2B User And Installation Manual page 24

Initial operation
Country code
Date
Time
The date and time must be confirmed with OK, otherwise initial opera-
tion cannot be completed.
Once the date and time have been entered, the TIME SETTINGS screen appears; see
„Settings menu" in page 31.
24
Select the country required using the/ buttons and confirm
with OK.
Further settings may be required depending on the country. These
settings depend on the grid operator.
The country code is automatically applied to all network partici-
pants.
Enter the current date.
▪ Use the / buttons to set the digits.
▪ Use the /  buttons to continue to the next digit.
▪ Choose OK to confirm the date entered.
Enter the current time.
▪ Use the / buttons to set the digits.
▪ Use the / buttons to continue to the next digit.
▪ Choose OK to confirm the time entered.
The date and time are automatically applied to all network partici-
pants.
Installation and user guide PLATINUM® inverter 5500 R3-S2, 7000 R3-S2, 8000 R3-S2, 9000 R3-S2