Settings Menu - Platinum 5500 R3-S2B User And Installation Manual

6.3 Settings menu

Time settings
Date / time
Date format
Daylight sav-
ing
Language
German
English
Italiano
Español
Nederlands
Français
Volume
0 ... 3
Installation and user guide PLATINUM® inverter 5500 R3-S2, 7000 R3-S2, 8000 R3-S2, 9000 R3-S2
▪ Enter date and time in the format shown.
▪ If changing to daylight savings time manually, the following
prompt appears: DAYLIGHT SAVING YES/NO.
– YES
One hour is added to the time set.
– NO
The time already set is used.
▪ Before the new values are selected, a security prompt is shown.
▪ Select date format.
Possible date formats: DD-MM-YYYY, MM-DD-YYYY, YYYY-MM-DD
MANUALLY
AUTOMATICALLY Automatic switch to daylight saving/wintertime
▪ Changing the date and time can cause saved data to be over-
written or lead to gaps in data logging.
▪ The inverter transfers the time settings to all network partici-
pants automatically.
▪ Select the language required.
The inverter transfers the language set to all network participants
automatically.
▪ Set the alarm volume for the built-in buzzer on this inverter.
Possible values: 0 ... 3
Factory setting: 0 (alarm off)
Switch to daylight saving/wintertime manually.
When the date and time are next entered, the
DAYLIGHT SAVING YES/NO prompt appears.
according to the country set
Menu
31