If you entered a valid code the thermostat will be locked or unlocked
(depending on its previous state). When locked, the word LOCKED
appears in the display (Figure 1). If an invalid code is entered the
word NO will briefly appear, indicating that an incorrect code was
entered (Figure 2).
User Manual
30
AC Power Monitor
The AC Power Monitor feature is enabled in the Installer
Settings (See Installer Manual). If enabled, this feature will
automatically be present.
If your thermostat was hardwired (power provided from the system
with batteries as a backup) then the AC Power Monitor feature will
indicate when a loss of power to the thermostat has occurred by
displaying NOAC.
Indoor Remote Sensing
Figure 1
Indoor remote sensing is achieved by installing a Braeburn
Installer Settings (See Installer Manual).
If a Braeburn indoor remote sensor was installed and properly configured in the Installer Settings, the thermostat
will sense temperature at a remote location or at a combination of a remote location and the thermostat location.
Figure 2
remote indoor sensor and is configured in the
®
31
User Manual