Ac Power Monitor; Indoor Remote Sensing - Braeburn 6100 User Manual

AC Power Monitor

The AC Power Monitor feature is enabled in the Installer
Settings (See Installer Manual). If enabled, this feature will
automatically be present.
If your thermostat was hardwired (power provided from the system
with batteries as a backup) then the AC Power Monitor feature will
indicate when a loss of power to the thermostat has occurred by
displaying NOAC.

Indoor Remote Sensing

Indoor remote sensing is achieved by installing a Braeburn remote indoor sensor and is configured in the
®
Installer Settings (See Installer Manual).
If a Braeburn indoor remote sensor was installed and properly configured in the Installer Settings, the thermostat
will sense temperature at a remote location or at a combination of a remote location and the thermostat location.
31 User Manual