Progammable Fan Mode; Compressor Protection; Locking And Unlocking The Thermostat - Braeburn 5020 User Manual

Programmable Fan Mode
Programmable Fan Mode is selected by pressing
FAN until PROG appears in the display. It is only
available in programmable mode.
Programmable Fan Mode allows the user to run
the fan continuously during a selected program
event. To use this feature, select fan ON while
setting program events. (See "Setting Your
Program Schedule", page 13).

Compressor Protection

Compressor protection is enabled/disabled
in the Installer Settings (See Installer Manual).
If enabled, this feature is automatically present in
cooling and/or heating modes.
This thermostat includes an automatic compressor protection delay to avoid potential damage to your system
from short cycling. This feature activates a short delay after turning off the system compressor.
Additionally, for multi-stage heat pump systems, this thermostat provides cold weather compressor protection
by locking out the compressor stage(s) of heating for a period of time after a power outage greater than 60
minutes. This compressor lockout can be manually overridden at any time by changing the system mode to OFF
momentarily, then back to HEAT.
User Manual
DAY/TIME
28

Locking and Unlocking the Thermostat

Your 3-digit Lock Code is set in the "User Options"
portion of this manual (See "Setting User Options",
page 8 and 11). Once the code is set, the
thermostat can be locked or unlocked at any
time by entering that code.
To lock or unlock the thermostat, press and hold the
DAY/TIME and HOLD buttons together for 5 seconds.
The screen will change, displaying 000 and LOCK
will be flashing. Press the SpeedBar or to
®
enter the first digit of your lock code and then press
NEXT* to advance to the next digit. Repeat this
process to enter the second and third digit of your
lock code. After entering the third digit, press RETURN.
*BACK and NEXT are secondary functions of the
BACK NEXT
DAY/TIME
PROG and HOLD buttons.
29 User Manual