Table of Contents
Advertisement
Filter Service Monitor
User Option 1
A user selectable service monitor will display a reminder for
a required air filter replacement. The time segment will flash
SRVC FLTR when the service interval has been reached. When
required cleaning or replacement has been performed, press the RETURN button to reset the timer. Select OFF or
a set number of days before the reminder will appear.
Extended Hold Period
User Option 2
The Extended Hold Period lets you select the period your thermostat will hold the temperature when the HOLD
mode is activated (See Setting the Temperature, page 19). When LONG is selected the thermostat will hold your
temperature indefinitely. When 24 HRS is selected, the thermostat will hold your temperature for 24 hours and
then return to the current program at that time. Not available in non-programmable mode.
Thermostat Lock Code
User Option 3
The Thermostat Lock Code sets a 3-digit code that you may use at any time to lock or unlock the thermostat.
Setting the code in the user options mode does not activate the lock feature (See Locking/Unlocking Thermostat,
page 24). You may choose a 3-digit code with
each digit being 0-9.
Wi-Fi Clear
User Option 4
Use this setting if you no longer want to be connected to your Wi-Fi network or if you change Wi-Fi routers.
Select WIFI to skip changes to your network settings. Select WIFI CL to clear all Wi-Fi network settings. You can
set up Wi-Fi again at a later time if desired (see Wi-Fi Setup Guide).
User Manual
10
Hide quick links:
Advertisement
Table of Contents
