How To Set Parameters - Toshiba TOSVERT VF-S11 Instruction Manual

4.2

How to set parameters

The standard default parameters are programmed before the unit is shipped from the factory. Parameters can be
divided into 4 major categories. Select the parameter to be changed or to be searched and retrieved.
Basic parameters
Extended parameters
User parameters
4
(automatic edit function)
History parameter
*
: The basic parameters that must be programmed
: The parameters for detailed and special setting. (See
: Indicates parameters that are different from the
: This parameter has the function of displaying, in
Adjustment range of parameters
: An attempt has been made to assign a value that is higher than the programmable range. Or, as a
result of changing other parameters, the programmed value of the parameter that is now selected
exceeds the upper limit.
: An attempt has been made to assign a value that is lower than the programmable range. Or, as a
result of changing other parameters, the programmed value of the parameter that is now selected
exceeds the lower limit.
If the above alarm is flashing on and off, no setting can be done of values that are equal to or greater
than  or equal to or lower than .
before the first use. (See 4.2.1)
4.2.2)
standard default setting parameters. Use them to
check after setting and to change setting.
(Parameter title: ). (See 4.2.3)
reverse chronological order, the five parameters that
were changed last. This function comes in very handy
when you adjust the inverter repeatedly using the
same parameter. (Parameter name: ). (See
4.2.4)
32
E6581160