Frequency Setting - Toshiba TOSVERT VF-S11 Instruction Manual

(3) Setting the frequency using external signals to terminal board
(= or )

Frequency setting

1) Setting the frequency using external potentiometer
PP
: Setting frequency
VIB
using potentiometer
CC
* The input terminal VIA can be used in the same way.
=: VIA effective, =: VIB effective
2) Setting the frequency using input voltage (0~10V)
+ VIA
: Voltage signal 0-10mAdc
- CC
* The input terminal VIB can be used in the same way.
=: VIA effective, =: VIB effective
Note: Be sure to turn the VIA slide switch to the V (voltage) position.
3) Setting the frequency using current input (4~20mA)
+ VIA
: Current signal 4-20mAdc
-
CC
* Setting of parameters also allow 0-20mAdc.
Note: Be sure to turn the VIA slide switch to the I (current) position.
★Potentiometer
Setting frequency using the potentiometer (1k-10kΩ, 1/4W)
60Hz
Frequency
0
MIN
★Voltage signal
Setting frequency using voltage signals (0∼10V).
60Hz
Frequency
0
0Vdc
★Current Signal
Current signal Setting frequency using current signals (4~20mA).
60Hz
Frequency
0
25
E6581160
MAX
10Vdc
4mAdc 20mAdc
3