Toshiba TOSVERT VF-S11 Instruction Manual page 45

(Continued)
Item displayed
Input terminal
Note 4
5
Note 5 Output terminal
CPU1 version
CPU2 version
Memory version
PID feedback
Frequency
command value
(PID-computed)
Integral input
power
Integral output
power
Rated current
Note 7 Past trip 1
Note 7 Past trip 2
Past trip 3
Note 7
Note 7 Past trip 4
(Continued overleaf)
Key LED
Communic
operated display ation No.
FE06
} } } i i } i i
0 }ii FE07
FE08

FE73

FE09

 FE22
FE15

k FE76
FE77

FE70

 ⇔
FE10
 ⇔
FE11
 ⇔
FE12
 ⇔ FE13
44
Description
The ON/OFF statuses of the control input
terminals (F, R, RES, S1, S2, S3, VIB and VIA) are
displayed in bits.
}}}ii}ii
ON: 
OFF: 
VIA
VIB
S3
S2
The ON/OFF status of each of the control signal
output terminals (RY, OUT and FL) at the
occurrence of a trip is displayed in bits.
0 }ii
ON: 
OFF: 
FL
The version of the CPU1 is displayed.
The version of the CPU2 is displayed.
The version of the memory mounted is displayed.
The PID feedback value at the occurrence of a trip
is displayed. (Hz / free unit)
The PID-computed frequency command value at
the occurrence of a trip is displayed. (Hz / free
unit)
The integrated amount of power (kWh) supplied to
the inverter is displayed.
(0.01=1kWh, 1.00=100kWh)
The integrated amount of power (kWh) supplied
from the inverter is displayed.
(0.01=1kWh, 1.00=100kWh)
The inverter rated current (A) at the occurrence of
a trip is displayed.
Past trip 1 (displayed alternately)
Past trip 2 (displayed alternately)
Past trip 3 (displayed alternately)
Past trip 4 (displayed alternately)
E6581160
F
R
RES
S1
RY-RC
OUT-NO