Table of Contents
Advertisement
Using authentication device (IC card type)
The authentication device (IC card type) is an IC card authentication system
that reads the IC card to perform personal authentication. Using this system,
you can perform authentication with an IC card to log in to this machine or
execute a print job when User Authentication is enabled in this machine.
To use the authentication device, first register the card ID of the user in this
machine. The registered user, who is authenticated with the card ID, can log
in to this machine or execute a print job. This section explains how to config-
ure the required settings in this machine, register users, and log in to this
machine with authentication.
Do not disconnect the USB cable while using the authentication
device. Doing so may cause the system to become unstable.
Do not leave the IC card within 40 mm of the card reader.
Configuring this machine
User authentication settings must be configured with MFP authentication on
this machine.
Configure the user authentication settings using Web Connection.
For details on using Web Connection, refer to "Reference Guide".
1
In Administrator mode of Web Connection, click [Security] tab - [Authenti-
cation] - [General Settings].
2
In [User Authentication], select [Device].
3
Click [Apply] to save the settings.
4
In the [General Settings] page of [Authentication Device Settings], select
[Authentication Type] and [IC Card Type].
–
In [IC Card Type], specify the required IC card type.
–
For [Authentication Type], specify how to log in to this machine after
registration.
[Card Authentication]: Allows the user to log in by simply placing the
IC card.
[Card Authentication + Password]: Allows the user to log in by placing
the IC card and entering the password.
–
For details on how to log in to this machine, refer to "Logging in to this
machine" on page 15-6.
5
Click [Apply] to save the settings
15-2
Using authentication device (IC card type)
Advertisement
Table of Contents
