Specifying Document Settings; [Simplex/Duplex] - Olivetti d-COLORMF3000 User Manual

This machine cannot automatically detect the size of an original docu-
ment that will be scanned. Before scanning the document, specify its
size. If the size of the original document is not correctly specified,
some parts of the image may be lost. For details on specifying the size
of an original document, refer to "[Original Size]" on page 10-5.
If the memory becomes full while the document is being scanned,
scanning cannot continue. To send the document pages that have
already been scanned, press the [Start] key. To stop the transmission,
press the [Stop] key.

Specifying document settings

The [Simplex/Duplex], [Original Size], [Original Settings], [Color Mode] and
[Original Type] parameters available from the [Settings] screen can be used
to specify document settings.

[Simplex/Duplex]

Select whether double-sided documents are to be scanned when the ADF is
used.
Item
[1-sided]
[2-sided]
[Cover + 2-sided]
10-4
Description
Select this setting when scanning a single-sided
document.
Select this setting when scanning a double-
sided document.
Select this setting when scanning a double-
sided document with a cover page. Only the
front side of the cover page will be scanned, and
then both the front and back sides of the remain-
ing pages will be scanned.
Performing Scan to E-mail mode operations