Table of Contents
Advertisement
Specifying document settings
The [Simplex/Duplex], [Original Size], [Original Settings], [Color Mode] and
[Original Type] parameters available from the [Settings] screen can be used
to specify document settings.
[Simplex/Duplex]
Select whether double-sided documents are to be scanned when the ADF is
used.
Item
[1-sided]
[2-sided]
[Cover + 2-sided]
[Original Size]
Specify the size of the document that is to be sent.
Item
[Standard Size]
[Custom Size]
10-20
Description
Select this setting when scanning a single-sided
document.
Select this setting when scanning a double-
sided document.
Select this setting when scanning a double-
sided document with a cover page. Only the
front side of the cover page will be scanned, and
then both the front and back sides of the remain-
ing pages will be scanned.
Description
Select the size of the document.
Select [Letter/Legal] to scan a document con-
taining different page sizes.
Specify the size of the document if it is a
non-standard size.
Press [X] and [Y], and then type in the document
size. [X] can be set between 30 mm and 356
mm (1.18 inches and 14.00 inches); [Y] can be
set between 30 mm and 216 mm (1.18 inches
and 8.50 inches).
Performing Scan to Folder mode operations
Advertisement
Table of Contents
