Table of Contents
Advertisement
[IPv6]
[Enable]
[Auto Setting]
[Link Local]
[Global Address]
[Gateway Address] Displays the gateway address.
[Netware]
[AppleTalk]
[Network Speed]
[IEEE802.1X]
[Binary Division]
[S/MIME Comm.Setting]
[S/MIME Enabled]
[Digital Signature]
[Encryption Method]
[Admin Settings]
Specify IPv6 settings.
Settings
[ON] / [OFF]
Select whether or not to enable IPv6.
Settings
[Enable] / [Disable]
Select whether or not to enable the IPv6 auto
setting.
Displays the link-local address.
Displays the global address.
Settings
[Enable] / [Disable]
Select whether or not to enable NetWare.
Settings
[Enable] / [Disable]
Select whether or not to enable AppleTalk.
Settings
[Auto] / [10 Mbps Full Duplex] / [10
Mbps Half Duplex] / [100 Mbps Full
Duplex] / [100 Mbps Half Duplex] /
[1 Gbps Full Duplex]
Specifies the transmission speed for the net-
work and the transmission method for bidirec-
tional transmission.
Settings
[Enable] / [Disable]
Select whether or not to enable IEEE802.1X.
Settings
[ON] / [OFF]
Select whether or not transmission data is
divided.
Specify S/MIME communication settings.
Settings
[Enable] / [Disable]
Select whether or not to enable S/MIME.
Settings
[Always add signature] / [Do not
add signature] / [Select when
sending]
Select the setting for digital signatures.
Settings
[RC2-40] / [RC2-64] / [RC2-128] /
[DES] / [3DES] / [AES-128] /
[AES-192] / [AES-256]
Select the encryption method for the body of
E-mail messages.
3-47
Advertisement
Table of Contents
