Error Messages On Remote Display - Xantrex XC3012 Owner's Manual

Troubleshooting

Error Messages on Remote Display

Table 4-2 Error Messages
Onboard Status Panel
Display Indicator lights
Red fault indicator light
E R R
flashing or illuminated
A C L
Red fault indicator light
E r r
illuminated
b a t
P o L
Red fault indicator light
E r r
flashing
C H f
C H g
H o t
Red fault indicator light
E r r
illuminated
C H g
H o t
Green 10% indicator light
C L d
flashes
Display green bank indicator
light for affected battery bank
illuminated
4–4
Fault Solution
Fault A fault has been detected. The fault code
will be shown immediately after
AC Low Check AC connections, check AC
Warning availability at source.
Reverse Reverse Polarity Battery connected.
Polarity Check connections. Ensure correct
polarity (negative connected to negative,
positive connected to positive).
Charger Call for service.
Hardware
Fault
Over- Allow the XC Series to cool. Improve
temperature ventilation or install in cooler location. If
Warning the temperature increases, the XC Series
will enter the fault level and stop
functioning.
Over- Allow the XC Series to cool. Improve
temperature ventilation or install in cooler location.
Shutdown
Battery Too Allow batteries to warm up before
Cold Warning attempting to charge again. Charging a
battery that has frozen is a potential
explosion hazard. If the temperature
drops, the XC Series will enter the fault
level and stop charging the affected bank.
.
E r r
975-0187-01-01