Installing The Xc Series; Installation Sequence - Xantrex XC3012 Owner's Manual

Installation

Installing the XC Series

WARNING: Shock and Energy Hazards
Be sure to read the safety guidelines and pay attention to all cautions and warnings
throughout the installation procedure. The installer is responsible for ensuring compliance
with the installation codes for your particular application.
Disconnect all sources of AC and DC power before proceeding.

Installation Sequence

To make charger installation quick and easy, Xantrex recommends that the
installation tasks be performed in the following sequence:
1. Select charger mounting position and plan AC and DC cable routing (page 1–8)
2. Install DC cable runs and fuses or breakers (page 2–3)
3. Make the AC connections at the charger (page 2–4)
4. Mount the remote display and charger in position (page 2–7)
5. Make the final DC and then AC cable connections (including earth grounds)
(page 2–10)
2–2 975-0187-01-01