Ac Input Module - HP BladeSystem c7000 Maintenance And Service Manual

Remove the Onboard Administrator tray.
4.
CAUTION:
more than one component or blank removed. When removing an active component, replace it
with a blank.
To replace the component, reverse the removal procedure.

AC input module

To remove the component:
Power down the server blades
1.
Power down the enclosure (on page 29).
2.
Loosen the two slotted T-15 Torx screws that secure the AC input module.
3.
Remove the AC input module.
4.
For best cooling practices, do not operate the enclosure for extended periods with
("Power down the server blades or workstation blades" on page 28).
Removal and replacement procedures 44