HP BladeSystem c7000 Maintenance And Service Manual page 35

Item Description
Blade Zone 1
1
Blade Zone 2
2
Blade Zone 3
3
Blade Zone 4
4
Storage blades and tape blades can be installed in the same quadrant as both full-height and half-height
blades. A bracket ships with each SB40c Storage Blade that allows a half-height blade to be mounted on top
of the storage blade.
The lower tape or storage blade cannot be removed without first removing the upper half-height blade.
To remove the component:
Identify the proper half-height or full-height blade in the enclosure
1.
64).
Back up all data.
2.
Power down the half-height or full-height blade
3.
on page 28).
Remove the blade:
4.
("Device bay
("Power down the server blades or workstation
Removal and replacement procedures 35
numbering" on page
blades"