Onboard Administrator; Onboard Administrator Tray - HP BladeSystem c7000 Maintenance And Service Manual

Onboard Administrator

To remove the component:
Disconnect all cables from the component.
1.
Press the release tab and open the handle.
2.
Remove the Onboard Administrator module.
3.
CAUTION:
more than one component or blank removed. When removing an active component, replace it
with a blank.
To replace the component, reverse the removal procedure.

Onboard Administrator tray

To remove the component:
Remove the Onboard Administrator modules
1.
Remove the Onboard Administrator blanks
2.
Press the release tab and open the handle.
3.
For best cooling practices, do not operate the enclosure for extended periods with
("Onboard Administrator" on page 43).
("Onboard Administrator
Removal and replacement procedures 43
blank" on page 42).