Replacing Cutting Unit Belts - Husqvarna Rider 13C Workshop Manual

Reparation instructions
Belt replacement on the mowing deck Combi
94, 102 and 112
The blades on mowing decks with "collision-proof"
blades are driven by a V-belt. Proceed as follows
to replace the V-belt:
1. Remove the cutting unit.
2. Undo the bolt on the lift strut and the two
screws on the cover. Lift the cover off the
cutting unit.
3. Loosen the spring (4) that tensions the V-belt
and pry off the belt.
The new belt is fitted in the reverse order.
53
English –