Operation Synopsis Of Programs For Ct1 - SteelFlex CT1 User Manual

OPERATION SYNOPSIS OF PROGRAMS FOR CT1

MANUAL PROGRAM
1.The user has the option to input their weight or just press Start.
2.The user makes all speed and elevation changes manually.
3.When the belt starts, a Dot Matrix Track Shows ¼ mile track. A
Blinking L.E.D. indicates present location simulated on the track.
In the center of the track will be a "0". L.E.D.'s turn off when
"Passed". When all L.E.D.'s turn off the user has completed ¼
of a mile, then a "1" will be displayed in the center of the track,
and all L.E.D.'s will be on indicating the beginning of the user's
2nd ¼ mile run. This will continue for as long as the runner is
on the treadmill. The final number displayed in the center of the
track will indicate how many ¼ miles have been completed.
TIME PROGRAM
1.After selecting the Time Program, the user inputs the time
desired for the exercise and then presses "Start" to begin.
Time will then count down and end routine when time runs out.
2.The user makes all speed and elevation changes manually.
3.When the belt starts, a Dot Matrix Track Shows ¼ mile track. A
Blinking L.E.D. indicates present location simulated on the track.
In the center of the track will be a "0". L.E.D.'s turn off when
"Passed". When all L.E.D.'s turn off the user has completed ¼
of a mile, then a "1" will be displayed in the center of the track,
and all L.E.D.'s will be on indicating the beginning of the user's
2nd ¼ mile run. This will continue for as long as the runner is
21