Pt-7/10 Usb User Manual - SteelFlex CT1 User Manual

Before using USB function of PT7 and PT10 correctly, please install
Steelflex USB program in your computer first.
1. How to set up program?
a. Edit window
Program
Edit
Speed
window
Speed
setting
Incline
window
Incline
setting
b. Operation
1. Set each bar of speed and incline by pressing arrows in each segment.
2. Graph in Speed window and Incline window will be changed.
3. Speed and Incline can be set by pressing each bar of speed window and
incline window.
4. After setting, please press SAVE. The file will be saved in the USB device
where you choose. File name in the computer will be PT10. CUS or PT7.
CUS and it can not be changed. Different name can not be read by
treadmill.
5. If data setting is over range, it will show
Note: Please notice, TYPE on USB operating window needs to the same as
59

PT-7/10 USB USER MANUAL

your treadmill, or the function will not work properly.
Exercise data
record
DAT ERR on treadmill console.
Item setting
Mode setting
Unit setting
Time setting
Weight setting
USB device
setting