SteelFlex CT1 User Manual page 23

on the treadmill.
The final number displayed in the center of the track will
indicate how many ¼ miles have been completed.
CALORIES PROGRAM
1.After selecting the Calories Program, the user inputs the
Calories desired to'burn', then presses "Start" to begin.
Calories will count down and end routine when Calories
reaches "0".
2.The user makes all speed and elevation changes manually.
3.When the belt starts, a Dot Matrix Track Shows ¼ mile track. A
Blinking L.E.D. indicates present location simulated on the track.
In the center of the track will be a "0". L.E.D.'s turn off when
"Passed". When all L.E.D.'s turn off the user has completed ¼
of a mile, then a "1" will be displayed in the center of the track,
and all L.E.D.'s will be on indicating the beginning of the user's
2nd ¼ mile run. This will continue for as long as the runner is
on the treadmill. The final number displayed in the center of
the track will indicate how many ¼ miles have been completed.
DISTANCE PROGRAM
1.After selecting the Distance Program, the user inputs the
Distance desired for routine, then presses "Start" to begin.
Distance will count down and end routine when Distance
reaches "0".
22