Table of Contents
Advertisement
Figure 54 Network > Wireless LAN 2.4G/5G > MAC Filter
The following table describes the labels on this screen.
Table 34 Network > Wireless LAN 2.4G/5G > MAC Filter
LABEL
DESCRIPTION
SSID Select
Select the SSID for which you want to configure MAC filtering.
MAC Address
Select to turn on (Enable) or off (Disable) MAC address filtering.
Filter
Filter Action
Define the filter action for the list of MAC addresses in the MAC Filter Summary table.
Select Allow to permit access to the EMG2926-Q10A, MAC addresses not listed will be
denied access to the EMG2926-Q10A.
Select Deny to block access to the EMG2926-Q10A, MAC addresses not listed will be allowed
to access the EMG2926-Q10A.
MAC Filter Summary
Set
This is the index number of the MAC address.
MAC Address
Enter the MAC address of the wireless station that is allowed or denied access to the
EMG2926-Q10A.
Apply
Click Apply to save your changes back to the EMG2926-Q10A.
Cancel
Click Cancel to reload the previous configuration for this screen.
Chapter 9 Wireless LAN
EMG2926-Q10A User's Guide
86
Hide quick links:
Advertisement
Table of Contents
