Table of Contents
Advertisement
Figure 78 Security > Firewall > Services l
The following table describes the labels on this screen.
Table 54 Security > Firewall > Services
LABEL
DESCRIPTION
ICMP
Internet Control Message Protocol is a message control and error-reporting protocol
between a host server and a gateway to the Internet. ICMP uses Internet Protocol (IP)
datagrams, but the messages are processed by the TCP/IP software and directly apparent
to the application user.
Respond to Ping
The EMG2926-Q10A will not respond to any incoming Ping requests when Disable is
on
selected. Select LAN to reply to incoming LAN Ping requests. Select WAN to reply to
incoming WAN Ping requests. Otherwise select LAN&WAN to reply to all incoming LAN
and WAN Ping requests.
Apply
Click Apply to save the settings.
Enable Firewall Rule
Enable Firewall
Select this check box to activate the firewall rules that you define (see Add Firewall Rule
Rule
below).
Apply
Click Apply to save the settings.
Add Firewall Rule
Service Name
Enter a name that identifies or describes the firewall rule.
Protocol
Select the protocol (TCP, UDP or ICMP) used to transport the packets for which you want
to apply the firewall rule.
Chapter 15 Firewall
EMG2926-Q10A User's Guide
112
Hide quick links:
Advertisement
Table of Contents
