Table of Contents
Advertisement
Table 52 Network > Static Route: Add/Edit
LABEL
DESCRIPTION
Destination IP
This parameter specifies the IP network address of the final destination. Routing is always
Address
based on network number. If you need to specify a route to a single host, use a subnet
mask of 255.255.255.255 in the subnet mask field to force the network number to be
identical to the host ID.
IP Subnet Mask
Enter the IP subnet mask here.
Gateway IP
Enter the IP address of the next-hop gateway. The gateway is a router or switch on the
Address
same segment as your EMG2926-Q10A's interface(s). The gateway helps forward packets
to their destinations.
Back
Click Back to return to the previous screen without saving.
Apply
Click Apply to save your changes with the EMG2926-Q10A.
Cancel
Click Cancel to set every field in this screen to its last-saved value.
Chapter 14 Static Route
EMG2926-Q10A User's Guide
109
Hide quick links:
Advertisement
Table of Contents
