Table of Contents
Advertisement
Use this screen to remotely turn on a device on the network. Click the Management > Remote
MGMT > Wake On LAN to open the following screen.
Figure 93 Management > Remote MGMT > Wake On LAN
The following table describes the labels on this screen.
Table 63 Management > Remote MGMT > Wake On LAN
LABEL
Wake On LAN over WAN
Settings
Enable WOL over WAN
Port
Wake On LAN
Wake MAC Address
Start
Apply
Cancel
Chapter 20 Remote Management
DESCRIPTION
Select this option to have the EMG2926-Q10A forward a WoL "Magic Packet" to
all devices on the LAN if the packet comes from the WAN or remote network
and uses the port number specified in the Port field. A LAN device whose
hardware supports Wake on LAN then will be powered on if it is turned off
previously.
Type a port number from which a WoL packet is forwarded to the LAN.
Enter the MAC Address of the device on the network that will be turned on.
A MAC address consists of six hexadecimal character pairs.
Click this to have the EMG2926-Q10A generate a WoL packet and forward it to
turn the specified device on.
A screen pops up displaying MAC address error if you input the MAC address
incorrectly.
Click Apply to save the setting to the EMG2926-Q10A.
Click Cancel to begin configuring this screen afresh.
EMG2926-Q10A User's Guide
133
Hide quick links:
Advertisement
Table of Contents
