Videotron EMG2926-Q10A User Manual page 43

Table 18 Status Screen Icon Key (continued)
ICON
The following table describes the labels shown on the Status screen.
Table 19 Status Screen: Router Mode
LABEL
Device Information
Host Name
Model Number
Firmware Version
Sys OP Mode
WAN Information
MAC Address
IP Address
IP Subnet Mask
Default Gateway
IPv6 Address
LAN Information
MAC Address
IP Address
IP Subnet Mask
DHCP
IPv6 Address
WLAN 2.4G Information
WLAN OP Mode
MAC Address
SSID
Channel
Security
WLAN 5G Information
Chapter 5 Router Mode
DESCRIPTION
Select a number of seconds or None from the drop-down list box to refresh all screen
statistics automatically at the end of every time interval or to not refresh the screen
statistics.
Click this button to refresh the status screen statistics.
Click this icon to see the Status page. The information on this screen depends on the
device mode you select.
Click this icon to see the Monitor navigation menu.
Click this icon to see the Configuration navigation menu.
Click this icon to see the Maintenance navigation menu.
DESCRIPTION
This is the System Name you enter in the Maintenance > General screen. It is for
identification purposes.
This is the model name of your device.
This is the firmware version and the date created.
This is the device mode to which the EMG2926-Q10A is set - Router Mode.
This shows the WAN Ethernet adapter MAC Address of your device.
This shows the WAN port's IP address.
This shows the WAN port's subnet mask.
This shows the WAN port's gateway IP address.
This shows the IPv6 address of the EMG2926-Q10A on the WAN.
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the LAN port's DHCP role - Server or Disable.
This shows the IPv6 address of the EMG2926-Q10A on the LAN.
This is the device mode to which the EMG2926-Q10A's wireless LAN is set - Access Point
Mode.
This shows the 2.4GHz wireless adapter MAC Address of your device.
This shows a descriptive name used to identify the EMG2926-Q10A in the 2.4GHz wireless
LAN.
This shows the channel number which you select manually.
This shows the level of wireless security the EMG2926-Q10A is using.
EMG2926-Q10A User's Guide
43