Videotron EMG2926-Q10A User Manual page 150

The following table describes the labels in this screen.
Table 72 Maintenance > Time
LABEL DESCRIPTION
Current Time and Date
Current Time This field displays the time of your EMG2926-Q10A.
Each time you reload this page, the EMG2926-Q10A synchronizes the time with the
time server.
Current Date This field displays the date of your EMG2926-Q10A.
Each time you reload this page, the EMG2926-Q10A synchronizes the date with the
time server.
Current Time and Date
Manual Select this radio button to enter the time and date manually. If you configure a new
time and date, Time Zone and Daylight Saving at the same time, the new time and date
you entered will have priority and the Time Zone and Daylight Saving settings will not
affect it.
New Time This field displays the last updated time from the time server or the last time
configured manually.
(hh:mm:ss)
When you select Manual, enter the new time in this field and then click Apply.
New Date This field displays the last updated date from the time server or the last date configured
manually.
(yyyy/mm/dd)
When you select Manual, enter the new date in this field and then click Apply.
Get from Time Select this radio button to have the EMG2926-Q10A get the time and date from the
Server time server you specified below.
User Defined Time Select User Defined Time Server Address and enter the IP address or URL (up to 20
Server Address extended ASCII characters in length) of your time server. Check with your ISP/network
administrator if you are unsure of this information.
Time Zone Setup
Time Zone Choose the time zone of your location. This will set the time difference between your
time zone and Greenwich Mean Time (GMT).
Daylight Saving Daylight saving is a period from late spring to early fall when many countries set their
clocks ahead of normal local time by one hour to give more daytime light in the
evening.
Select this option if you use Daylight Saving Time.
Start Date Configure the day and time when Daylight Saving Time starts if you selected Daylight
Saving. The at field uses the 24 hour format. Here are a couple of examples:
Daylight Saving Time starts in most parts of the United States on the second Sunday of
March. Each time zone in the United States starts using Daylight Saving Time at 2 A.M.
local time. So in the United States you would select Second, Sunday, March and
select 2 in the at field.
Daylight Saving Time starts in the European Union on the last Sunday of March. All of
the time zones in the European Union start using Daylight Saving Time at the same
moment (1 A.M. GMT or UTC). So in the European Union you would select Last,
Sunday, March. The time you select in the at field depends on your time zone. In
Germany for instance, you would select 2 because Germany's time zone is one hour
ahead of GMT or UTC (GMT+1).
Chapter 24 Maintenance
EMG2926-Q10A User's Guide
150