Figure 42 Network > WAN > Internet Connection: IPoE Encapsulation (IPv4 Only)
The following table describes the labels on this screen.
Table 24 Network > WAN > Internet Connection: IPoE Encapsulation
LABEL
DESCRIPTION
ISP Parameters for Internet Access
Encapsulation
You must choose the IPoE option when the WAN port is used as a regular Ethernet.
IPv4 / IPv6
Select IPv4 Only if you want the EMG2926-Q10A to run IPv4 only.
Select Dual Stack to allow the EMG2926-Q10A to run IPv4 and IPv6 at the same time.
Select IPv6 Only if you want the EMG2926-Q10A to run IPv6 only.
Chapter 8 WAN
EMG2926-Q10A User's Guide
67