Videotron EMG2926-Q10A User Manual page 23

Internet Connection Type: IPoE
Figure 11
The following table describes the labels on this screen.
Table 6 Internet Connection Type: IPoE
LABEL
Internet Connection Type
Obtain an IP Address
Automatically
Static IP Address
IP Address
Subnet Mask
Gateway IP Address
First DNS Server
Second DNS Server
Exit
Back
Next
Note: If you get an error screen after clicking Next, you might have selected the wrong
Internet Connection type. Click Back, make sure your Internet connection is
working and select the right Connection Type. Contact your ISP if you are not sure
of your Internet Connection type.
Chapter 3 Connection Wizard
DESCRIPTION
Select the IPoE option.
Select this radio button if your Internet Service Provider (ISP) did not assign you a
fixed IP address.
Select this radio button if your ISP assigned an IP address for your Internet
connection.
Enter the IP address provided by your ISP.
Enter the IP subnet mask in this field.
Enter the gateway IP address in this field.
Select Obtained From ISP if your ISP dynamically assigns DNS server
information (and the EMG2926-Q10A's WAN IP address). The field to the right
displays the (read-only) DNS server IP address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the DNS
server's IP address in the field to the right.
Select None if you do not want to configure DNS servers. If you do not configure
a DNS server, you must know the IP address of a computer in order to access it.
Click this to close the wizard screen without saving.
Click this to return to the previous screen.
Click this to continue.
EMG2926-Q10A User's Guide
23