VTech VT2032 User Manual page 47

4. Press OK to enter the Old PIN. (Default Remote Access PIN is 0000).
5. Press OK to enter the New PIN.
6. Press OK to enter the New PIN again.
Note:
If the new PIN entered in Step 6 is not matched with the new system PIN entered in Step 5, user is requested to enter the valid system PIN
again in Step 5.
7. Press OK to reconfirm.
9.5.8.2 Activate or Deactivate the Remote Access
U D
1. Press and / to select ANS. MACHINE.
U D
2. Press OK and / to select TAM SETTINGS.
U D
3. Press OK and / to select REMOTE ACCESS.
U D
4. Press OK and / to select ON or OFF to turn on or off the remote access respectively.
5. Press OK to confirm.
9.5.8.3 Access Your Answering Machine Remotely
You can ring your Retro Phone from another tone-dialing phone to switch on or off the answering machine and listen to your messages
remotely.
1. Place a call from a tone-dialing phone to your Retro Phone.
2. When the answering machine answers the calls and starts playing the OGM, press
Note:
_
Enter the while OGM is still playing and proceed with the following in order to access the answering machine remotely.
3. Enter the 4-digit Remote Access PIN.
Note:
If the 4-digit Remote Access PIN is entered incorrectly three times consecutively, the line will be released automatically.
_
.
44