Custom Name; Call Timer; Vibrate; Handset Pairing - Aastra 480i CT User Manual

Custom name

Custom name allows the user to
personalize the name/label for the
cordless handset. In a multi-handset
environment, this is an ideal option to
personalize each handset to its user or
extension number.
To customize the name:
 . Â
1. Press  Â
2. Navigate to Custom Name or press
4.
3. Press the Change softkey.
4. Press the Edit softkey. If a custom
name already exists, the Delete
softkey will be presented.
5. Using the keypad, type out a new
label or use the scroll keys Ï
 to move the cursor to the desired   Â
display position or to erase text.
6. The ChCase softkey is available to
toggle between upper and lower
case text entry.
7. Press the Save softkey to save the
name.
8. Press the Goodbye ∫ key to return
to the main idle screen.
Note: In editing mode, the Volume Bar can
be used in place of the
keys to control the screen cursor.
Pressing the Lower end volume bar
for Backspace/Erase; and pressing
the Higher end volume bar to add a
Space.

Call timer

When the call timer is enabled, the
timer starts from the first call and
continues until all calls have been
released.
Note: The call timer is not usable for call
accounting since the timer continues
to increment even when the call is on
hold.
5 Model / User Guide
Ï and Ï
Ï
Ï Ï Â Â
Ï Ï Â Â
and

Vibrate

The Vibrate option allows the handset
to signal an incoming call by vibrating
as well as ringing. By default, this
option is always Off.
• To enable this feature, press the
Change softkey and the display will
indicate "Vibrate On" and "-
confirmed-" and will quickly
return to the previous menu
display.
• Once the Vibrate is On, p icon is
shown beside the ringer icon on the
top right line of the display.
• Pressing the ∫ key will return you
to the main idle display screen.

Handset Pairing

All handsets must be paired to a 480i
CT base before it can be used. Please
refer to the section entitled "Pairing
and Unpairing Cordless Handset to
Base" on page 27.

Key Lock On or Off

The key lock option enables the user
to lock the keypad keys. This prevents
accidental activation of the phone.
To lock the keys from the key lock
option page:
• Press Change softkey to turn Key
lock ON or OFF. The screen will
display Key lock On or Key lock Off
-confirmed-.
Pressing the ∫ key will return you to
the main idle display screen.
Note: You can activate the Key Lock Off or
On by pressing only the
* key from the idle screen. *
*
the*

Backlight

The Backlight option allows the user
to turn on or off the backlit light on the
LCD display.
Press Change softkey to turn Backlight
ON or OFF.
   Â
and then