Feature Key List; Menu List; Multifunction Handset Led Indicator; Battery Charging - Aastra 480i CT User Manual

Feature Key List (

The 480i CT cordless handset supports a programmable feature key list for easy
access to common features. The available features include line keys, intercom,
directory, callers log, transfer, conference, and public/private call mode.
Â

Menu List (

)
The Menu list allows access to intercom calling, and personalization of handset
including language, ring tone, vibrate, backlight and silent alert. Please refer to
the section "Customizing Your 480i CT Cordless Handset" on page 4.

Multifunction Handset LED Indicator

The multifunction Handset LED provides the following user feedback:
• Flash: Message Waiting Indicator – Slow
• Flash: Alerting – Rapid
• Flash: Mute – intermittent
• Flash: Hold – Intermediate
• Solid: On an active call

Battery Charging

The handset is powered by a nickel metal hydride battery pack. To install and
charge the battery:
1. Slide the cover of the battery compartment.
2. Place the battery pack in the compartment with the connector wires pointing
towards the bottom of the handset.
3. Connect the battery terminal wire to the charging pins located in the
compartment
4. Slide the cover of the battery compartment back onto the handset
5. Place the handset, face up, in the charging cradle. The handset should easily
slide into the charging cradel. If it does not, check the battery compartment
cover to ensure it is in the proper position.
To confirm that the battery is charging, check the battery icon symbol on the
handset display to see if the lines inside the icon are flashing left to right.
Note: The battery must be charged for a minimum of six hours prior to initial usage of the
phone.
Handset Battery Indicator & Status
The display provides "at a glance" information on the handset battery.
dcba
The bars indicate the battery charge level — 4 for full, needs
recharging when only 1 bar appear
f
The bars will flash when the battery is being recharged on the
charger stand.
Note: The handset is designed to recharge the batteries automatically, when required and
placed on the charger stand. The battery icon will not flash and the handset does not
charge every time it is placed on the stand. If a defective battery is replaced, then the
battery Icon is not identified until the new battery is charged for at least 2 minutes.
Ï
)
Model / User Guide 16