Aastra 480I Ct Web Client - Aastra 480i CT User Manual

Aastra 480i CT Web Client

To access the AASTRA 480i CT WEB
CLIENT, open your web browser
(supports Internet Explorer and Gecko
engine based browser like firefox or
mozilla) and enter the phone's IP
address into the address field, starting
withthe web prefix http://
In the side menu of the AASTRA 480i
CT WEB CLIENT, there are three main
categories: STATUS, USER and
ADMIN.
• The STATUS category contains
read only status information for
sub-categories Network, Hardware
and Firmware.
• The USER category contains user
configurable sub-categories Reset
and Password. This section is
accessed through their user level or
the administrator level user name
and password (You'll be prompted
when one of these options is
selected). For more information,
refer to the Aastra 480i CT Adminis-
trator Guide .
• The ADMIN category contains
administrator only configurable
sub-categories: Network and Firm-
ware. This section is accessed
through the admin level user name
and password (You'll be prompted
when one of these options is
7 Model / User Guide
selected). For more information,
refer to section "Configuring the
480i CT IP phone" on page 8.
For the administrator, the default user
name is "admin" and password is
"22222", and for the user, the default
user name is "user" and the password
field is left blank. The passwords can
be changed using the web client or by
using the phone's SIP Settings option.