Can't Access N4100+ From The Lan; Can't Map A Network Drive In Windows Xp; N4100+ Chassis Feels Hot; Can't Find Printer Server / Media Server / Download Manager - Thecus N4100+ User Manual

Can't Access N4100+ from the LAN

If you cannot access the N4100+ from the LAN, make sure that its network cable
is correctly plugged in. Also, check to see if the N4100+'s WAN and LAN settings
are configured correctly.

Can't Map a Network Drive in Windows XP

You may have problems mapping a network drive under the following conditions:
1. The network folder is currently mapped using a different user name and
password. To connect using a different user name and password, first
disconnect any existing mappings to this network share.
2. The mapped network drive could not be created because the following
error has occurred: Multiple connections to a server or shared
resource by the same user, using more than one user name, are
not allowed. Disconnect all previous connections to the server or shared
resource and try again.
To check out existing network connections, type net use under the DOS prompt.

N4100+ Chassis Feels Hot

The N4100+ uses its chassis to dissipate heat, and feeling warm to the touch is
completely normal. As such, make sure that the N4100+ is left in a well-
ventilated area to avoid overheating the unit.

Can't Find Printer Server / Media Server / Download Manager

To use these functions, you must first install their respective modules. Once
installed, these will appear on the Main Menu. For installation instructions, refer
to the sections below:
Chapter 4: Additional Feature Setup>
Chapter 4: Additional Feature Setup>
Chapter 4: Additional Feature Setup>

Restoring Factory Defaults

From the System menu, choose the Factory Default item and the Reset to
Factory Default screen appears. Press Apply to reset the N4100+ to factory
default settings.
WARNING

Problems with Time and Date Settings

The administrator is able to select an NTP Server to keep the N4100+'s time
synchronized. However, if the N4100+ can not access the Internet, you may
encounter a problem when setting the Time and Time Zone. If this happens:
1. Login to the Web Administration Interface.
2. Navigate to System > Time.
Media Server Module Installation
Download Manager Module Installation
Printer Server Module Installation
Resetting to factory defaults will not erase the data stored in the hard disks, but
WILL revert all the settings to the factory default values.
69