First Time Setup; Step 1: Initial Login; Step 2: System Check And Configuration; Step 3: Configure Network Settings - Thecus N4100+ User Manual

First Time Setup

Once the hardware is installed, physically connected to your network, and
powered on, you can now configure the Thecus N4100+ so that it is accessible to
your network users. Follow the steps below for initial software setup.

Step 1: Initial Login

Make sure your network is connected to the Internet and access the N4100+
Login webpage:
1. Type in the default IP address http://192.168.1.100 in your browser's
address line. If you have changed the N4100+'s IP address, type this in
instead.
NOTE
2. The Login screen appears.
3. To gain initial access to the system type in the factory default
administrator user name and password, which are as follows:
User Name:
Password:
4. Press Login.
5. The About screen from the Status menu appears showing product
information.

Step 2: System Check and Configuration

Once logged in, you are greeted with the Web Administration Interface, where
you can check the N4100+'s status, as well as configure its operating parameters.
1. In the Status menu, choose the System item to go to the System
Status screen. Check that the basic system information such as CPU
loading, and system up time.
2. In the Status menu, choose the Info item to go to the System
Information screen. Change the System Description to describe your
system and press Apply. This information appears on the Login page.
3. In the System menu, choose the Administrator Password item. The
screen that appears lets you change the administrator password for the
system. Press Apply to confirm your settings.
4. In the System menu, choose the Time item and the Time screen appears.
Set the date, time and time zone and press Apply.

Step 3: Configure Network Settings

After setting the N4100+'s basic configuration options, the next step is to
configure its network settings.
1. In the Network menu, choose the WAN item and the Network
Configuration screen appears.
To access any IP address, your computer must be configured with the correct IP
settings. The IP address should be 192.168.1.x, where x is a number between 1 and
254.
admin
admin
16