Edit - Editing Discrimination Patterns - Minelab Explorer SE Quick Start Manual

MAIN MENU > DISCRIM > EDIT
50 EDIT - Editing
Discrimination Patterns
Target Frame Size Discrimination Pattern
This allows you to select the
The shaded and unshaded
size of the framed area you areas of the screen
wish to accept or reject from
schematically represent the
the displayed Discrimination
current Discrimination Pattern.
Pattern. There is a choice of
three sizes.
Accept or Reject Horizontal Navigation
Framed Area Pressing the shift buttons
Instructs Explorer SE to adjacent to these arrows
accept the framed area moves the target frame
on selection of the tick to the left or right of the
icon. Selection of the screen.
cross icon will reject the
framed area. This edits
the current Pattern.
Target Frame
Any area of the screen
enclosed by this frame
may be excluded from
or become part of your
preferred target Pattern.
Vertical Navigation
Pressing the shift buttons
next to these arrows
moves the target frame
up or down the screen.
EDIT enables you to make manual
changes to individual areas (specific
pixels) of the Discrimination Pattern.
LEARN may not provide the exact
discrimination result you wanted (even
when using a different-sized cursor).
Rather than start all over again, you
can just 'touch up' your learn results.
Similarly, you may find that the
Discrimination Pattern for a specific
target type (e.g. foil) may need to be
modified to suit your requirements.
Make sure Pinpoint is OFF before using
EDIT to customize your Discrimination
Pattern.
51