GCC Technologies Expert Pro Series User Manual page 23

Step 1:
Connecting your GCC cutter
1. Connect the USB connector to the machine and then USB driver will
installed automatically.
NOTE
Check that the USB mode option under [ MISC ] → [ USB Printer Type ] menu is
set to Common USB Mode before running the installation.
Step 2: Installing the software
(1) Put the installation CD into your CD-ROM.
USB device is connected before you start the driver installation.
(2) Choose the model you want to install from the driver list and click on
either the 32 bit or 64 bit driver installation depending on the operating
system installed on your computer to start the installation.
Installation
Please make sure that the
2-13
Expert Pro User Manual