Table of Contents
Advertisement
18
TROUBLESHOOTING
WARNING!!!
Check to make sure all power sources are disconnected
before starting any troubleshooting. Safety gloves and glasses
should be worn when working on the unit. Serious injury or death
may occur if safety precautions are not followed.
Light Issue (All not
turning on)
Night Light ( Not
working)
Light Issue (One light
not turning on)
Filters Jammed
Burnt/melted control
switch
Speed levels not
working correctly
Unit lacking smoke
intake
Unit showing no power
indication
Unit making humming
noise
TROUBLESHOOTING
WS38 Series
1. New Transformer replacement is required.
1. Sensor may be defective, replacement is required.
1. Replace defective fixture with new fixture.
1. Filters may have been place under oil tray.
1. Complete Control switch replacement is required.
1. Complete Control switch replacement is required.
1. Make sure a reducer has not been installed.
1. Make sure the power source is working properly.
2. All wiring is connected.
1. Replace defective capacitor.
Advertisement
Table of Contents
