Start-Up Display; Focus Adjustment; Initial Setting (Display Language) - Panasonic PT-DZ16KE Operating Instructions Manual

Start-up display

When the projector is switched on for the first time after purchase, as well as when [ALL USER DATA] is executed from the [PROJECTOR
SETUP] menu → [INITIALIZE], the focus adjustment screen is displayed after projection starts, then the [INITIAL SETTING] screen is
displayed. Set them according to the circumstances.
In other occasions, you can change the settings by menu operations.

Focus adjustment

Adjust the focus to display the menu screen clearly.
You may also need to adjust the zoom and shift.
Refer to "Adjusting the focus, zoom, and shift" (x page 51) for details.
1) Press asqw to adjust the focus.
2) Press the <MENU> button to proceed to the initial setting.

Initial setting (display language)

Select the language to show on the screen.
After completed the initial setting, you can change the display language from the [DISPLAY LANGUAGE] menu.
1) Press as to select the display language.
2) Press the <ENTER> button to proceed to the initial setting.
24 - ENGLISH
Chapter 1 Preparation — Start-up display
LENS
FOCUS
FOCUS POSITION
ADJUST
INITIAL SETTING
Please select DISPLAY LANGUAGE.
SELECT
SET
ENTER
+0