Table of Contents
Advertisement
Chapter 2 Getting Started — Attaching/removing the projection lens (optional)
2)
Remove the lens fixing screw.
f Use a Phillips screwdriver to remove the first screw to the right of the projection lens mark (orange).
3)
While pressing the lock button, remove the projection lens by turning it counterclockwise. (Fig. 1)
f Turn it counterclockwise until the mark on the projection lens (orange) is aligned with the mark on the projector (E to the left of LOCK).
4)
Attach the lens mount cover.
Note
f Some lenses may not have a screw hole to use to secure the projection lens.
Attention
f Store the removed projection lens where it will be free from vibration and impact.
f Store the removed lens fixing screw in a safe place.
42 - ENGLISH
Advertisement
Table of Contents
