Table of Contents
Advertisement
Chapter 6 Appendix — Precautions for attaching the ceiling mount bracket
Precautions for attaching the ceiling mount bracket
f When installing the projector onto a ceiling, be sure to use the specified optional Ceiling mount bracket (Model No.: ET-PKD510H (for high
ceilings), ET-PKD510S (for low ceilings)).
f When installing the projector, attach the drop-prevention set that comes with the ceiling mount bracket to the projector. If you need the drop-
prevention set (hex bolt with washer (M10 x 40), wire rope: TTRA0143) separately, consult your dealer.
f Ask a qualified technician to do the installation work such as mounting the projector on the ceiling.
f Panasonic takes no responsibility for any damage to the projector resulting from use of a ceiling mount bracket not manufactured by
Panasonic or the inappropriate choice of location for installation, even if the warranty period of the projector has not expired.
f Unused products must be removed promptly by a qualified technician.
f Referring to the following screw holes for ceiling mount diagram, use screws of sufficient length to reach the embedded nuts.
f Use a torque screwdriver or Allen torque wrench to tighten bolts to their specified tightening torques. Do not use electric screwdrivers or
impact screwdrivers.
f Read the Installation Instructions for the ceiling mount bracket for details.
f The model numbers of accessories and optional accessories are subject to change without prior notice.
Bottom view
Unit: mm
174 - ENGLISH
Model No. of Ceiling mount bracket: ET-PKD510H (for high ceilings)
Screw holes for ceiling mount
30 (1-3/16")
Max. screw hole depth
30 (1-3/16")
Max. screw hole depth
Torque: (M6) 4 ± 0.5 N·m
ET-PKD510S (for low ceilings)
M6
25 (31/32")
Thread engagement depth
Space
M6
12 (15/32")
12 (15/32")
Embedded nut (Thread engagement
depth)
Advertisement
Table of Contents
