Table of Contents
Advertisement
Adjusting signal level automatically
1)
Press as to select [AUTO SETUP].
2)
Press the <ENTER> button.
f The [AUTO SETUP] screen is displayed.
3)
Press as to select [SIGNAL LEVEL ADJUST].
4)
Press qw to switch the item.
[OFF]
[ON]
Note
f [SIGNAL LEVEL ADJUST] may not function properly unless a still image containing clear blacks and whites is input.
[RGB IN]
Set to match the signal to input to the <RGB 1 IN> terminal.
Setting [RGB1 INPUT SETTING]
1)
Press as to select [RGB IN].
2)
Press the <ENTER> button.
f The [RGB IN] screen is displayed.
3)
Press as to select [RGB1 INPUT SETTING].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[RGB/YP
P
]
B
R
[Y/C]
Switching the slice level of an input sync signal
1)
Press as to select [RGB IN].
2)
Press the <ENTER> button.
f The [RGB IN] screen is displayed.
3)
Press as to select [RGB1 SYNC SLICE LEVEL] or [RGB2 SYNC SLICE LEVEL].
4)
Press qw to switch the item.
[LOW]
[HIGH]
86 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Does not perform automatic adjustment.
Adjusts black level (on-screen menu [BRIGHTNESS]) and white level (on-screen menu
[CONTRAST]) when automatic setup is executed.
Select this item when an RGB signal or YC
terminal.
Select this item when a luminance signal and color signal is being input to the <RGB 1 IN> terminal.
Sets the slice level to [LOW].
Sets the slice level to [HIGH].
C
/YP
P
signal is being input to the <RGB 1 IN>
B
R
B
R
Advertisement
Table of Contents
