Table of Contents
Advertisement
8)
Press qw to switch the item.
[ON]
[OFF]
Note
f Refer to "<SERIAL IN>/<SERIAL OUT> terminal" (x page 161).
[STATUS]
Display the status of the projector.
1)
Press as to select [STATUS].
2)
Press the <ENTER> button.
f The [STATUS] screen is displayed.
3)
Press qw to switch the pages.
f The page will change each time you press the button.
[INPUT]
[SIGNAL NAME]
[SIGNAL FREQUENCY]
[PROJECTOR RUNTIME]
[LAMP1]
[LAMP2]
[LAMP3]
[LAMP4]
[INTAKE AIR TEMP.]*
[OPTICS MODULE TEMP.]*
[AROUND LAMP TEMP.]*
[REMOTE2 STATUS]
[PROJECTOR TYPE]
[SERIAL NUMBER]
[LAMP UNIT MODEL NO.]
[LAMP1 SERIAL NUMBER]
[LAMP2 SERIAL NUMBER]
[LAMP3 SERIAL NUMBER]
[LAMP4 SERIAL NUMBER]
[MAIN VERSION]
[SUB VERSION]
[NETWORK VERSION]
[ON COUNT]
[NUMBER OF ENTRY
SIGNAL]
[AC VOLTAGE]
[COOLING CONDITION]
106 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Returns the response when the ID setting is GROUP.
Does not return the response when the ID setting is GROUP.
Displays the input terminal currently selected.
Displays the input signal name.
Displays the frequency of the input signal.
Displays the operation times of the projector.
Displays the runtime and status of Lamp 1.
Displays the runtime and status of Lamp 2.
Displays the runtime and status of Lamp 3.
Displays the runtime and status of Lamp 4.
Displays the status of the air intake temperature of the projector.
1
Displays the status of the internal temperature of the projector.
1
Displays the status of the temperature around the lamps of the projector.
1
Displays the control status of the REMOTE2.
Displays the type of the projector.
Displays the serial number of the projector.
Displays the model no. of the lamp unit.
Displays the serial number of the lamp 1.
Displays the serial number of the lamp 2.
Displays the serial number of the lamp 3.
Displays the serial number of the lamp 4.
Displays the main version of the firmware of the projector.
Displays the sub version of the firmware of the projector.
Displays the firmware version of the projector.
[POWER ON TIMES]
[LAMP1 ON] - [LAMP4 ON]
[SHUTTER]
Displays the number of registered signals.
Displays the status of the AC voltage.
Displays the set cooling conditions. When [AUTO] is set, automatically recognized result is displayed.
Displays the number of times the power is turned on.
Displays the number of times the lamp is turned on.
Displays the number of times the shutter is closed.
Advertisement
Table of Contents
