Table of Contents
Advertisement
4)
Adjust bright red areas.
f Use [RED] in [WHITE BALANCE HIGH] to adjust the white level 100 % of the video signal to the 100 % position of the waveform
monitor.
5)
Use the procedure for [RED] to adjust [GREEN] and [BLUE].
Note
f Before adjusting the black level for DVI-D signals, HDMI signals, and SDI signals, confirm that the [SIGNAL LEVEL] setting is correct.
[CUT OFF]
Each red, green, and blue color component can be removed.
1)
Press as to select [CUT OFF].
2)
Press the <ENTER> button.
f The [CUT OFF] screen is displayed.
3)
Press as to select [RED], [GREEN], or [BLUE].
4)
Press qw to switch the item.
[OFF]
[ON]
Note
f When input is switched or a signal is switched, the cutoff setting returns to its original setting (off).
94 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Disables cutoff.
Enables cutoff.
Advertisement
Table of Contents
