Heating Sensor (Ntc-Sensor) - Electrolux T5675 Service Manual

Sensors and overheating thermostats
15

5.2.2 Heating sensor (NTC-sensor)

Description
The heating sensor is placed next to the fan motor on the back of the machine.
The heating sensor measures the temperature in the outlet air and the signal is returned to the PCB.
The PCB turns the heating unit off when the outlet air thermistor indicates that the required
temperature has been reached.
Replacement of heating sensor (NTC-sensor)
Disconnect the power to the machine.
Demount the lower rear panel.
Disconnect the heating sensor and remove it. Connect the new heating sensor and put it in position.
Make sure the sensor gets all the way in.
⑦
fig.W00250A
Remount the lower rear panel.