Electrolux T5675 Service Manual page 41

Motor
41
In order to loosen the belt, first loosen the four screws a bit.
56
1 2 3 4
fig.490377800
Loosen the belt (C) from the "motor arm".
57
fig.7224B
Put the new belt in position (C) and tighten the screws. Start by tightening 1 and 3 a bit. Thighten 4
and check the belt tension with a frequency meater or similar. The frequency shall be 80 Hz ± 5.
Adjust with 4 if necessary. Then tighten 2 with tightening torque 80 Nm ± 5 and finally 1 and 3 with
tightening torque 6 Nm ± 1 again when all is in position. Check that 5 is tightened.
58
1 2 3 4
5
fig.49077800A