Table of Contents
Advertisement
8. Manual mode
30°C
2
5°C
3
1
9. Absence mode
1
31
2
1
❶ Turn the dial to
.
❷-> ❹ Set the return date with + or -, then confirm
with OK (❺). The countdown begins.
- To make changes to the current
- To cancel, turn the selector dial.
- The return date setting is not available if
programming on the Tydom app is active (menu 1-10 = 1).
10. Off mode
This mode switches off your heating system.
Turn the dial to
In this mode, the thermostat only displays the room temperature.
STOP
This mode is used to set a constant temperature (5 to 30°C)
This setting may be restricted (menu 2-01 = 1).
In this mode, all programming is ignored (Tybox and Tydom app), and so are
manually triggered scenarios (Tydom) and voice assistant commands.
❶ Turn the dial to
The "manual mode" setpoint temperature flashes.
❷ ❸ Press + or - to set, then OK to confirm.
Turn the dial to exit the mode.
This mode sets your home heating to Frost Protection if you are away for several days.
The Frost protection setpoint is adjustable (see «Adjusting temperatures»).
1
12
3
mode, press OK.
.
.
2021 ...
4
5
28/02/2021
00.00
6
❻ Return to initial mode (AUTO or manual) at the end
of the countdown, at 0h00.
Temperature set in
absence mode
Number of days
remaining before return
to normal mode
(AUTO or manual)
19
Advertisement
Table of Contents
