Enabling/Disabling Voice Activated Intercom; Enabling/Disabling Voice Prompts - Sena SPH10H-FM User Manual

SPH10H-FM
you can answer the phone by saying "Hello" or any
other word loudly. This is enabled from the factory but
you can disable this. If this mode is disabled, you have
to tap the Jog Dial or the Phone Button to answer an
incoming call.
9.2 Enabling/Disabling Voice Activated
Intercom
Voice Prompt
Factory Default
Enable
Disable
If this feature is enabled, you can initiate an intercom
conversation with the last connected intercom friend by
speaking any word loudly enough.The most effortless
way to trigger intercom VOX is to blow into the microphone
as if blowing dust off the microphone. If you start an
intercom conversation by VOX, the intercom terminates
automatically when you and your intercom friend remain
silent for 20 seconds. However, if you manually start an
intercom conversation by tapping the Jog Dial, you have
to terminate the intercom conversation manually.
18
"VOX intercom"
Disable
Tap the Phone Button
Tap the Jog Dial
However, even when this feature is enabled, if you
terminate intercom conversation manually with the
Jog Dial, you are not able to start intercom by voice
temporarily. In this case, you have to tap the Jog Dial
to restart the intercom. This is to prevent repeated
unintentional intercom connections by strong wind
noise. If you tap the Jog Dial to start an intercom
conversation, it is not terminated by 20 seconds of
silence. After turning SPH10H-FM off and on, you can
start intercom by voice again.

9.3 Enabling/Disabling Voice Prompts

Voice Prompt
Factory Default
Enable
Disable
You can disable voice prompts by configuration setting,
but the following voice prompts are always on.
- Voice prompts for configuration setting menu
- Voice prompts for battery level Indicator
- Voice prompts for factory reset
"Voice prompt"
Enable
Tap the Phone Button
Tap the Jog Dial