Rds Af Setting (Radio Data System: Alternative Frequencies); Delete All Bluetooth Pairing Information; Exit Voice Configuration Menu - Sena SPH10H-FM User Manual

9.4 RDS AF setting (Radio Data System:
Alternative Frequencies) (Factory Default:
Disabled)
Voice Prompt
Factory Default
Enable
Disable
RDS AF allows a receiver to re-tune to a different
frequency providing the same station has an additional
frequency. In RDS AF, the receiver will "re-tune" to the
second frequency location when the first signal becomes
too weak. With RDS AF enabled on the receiver, a radio
station with more than one frequency can be used.
Note:
RDS feature may be available when radio channel station
provides equivalent service.
"RDS AF setting"
Disable
Tap the Phone Button
Tap the Jog Dial

9.5 Delete All Bluetooth Pairing Information

Voice Prompt
Factory Default
Execute
To delete all Bluetooth pairing information of the
SPH10H, rotate the Jog Dial until you hear a voice
prompt, "Delete all pairings", and tap the Phone
Button to confirm. Taping the Jog Dial is not available
for this setting.

9.6 Exit Voice Configuration Menu

Voice Prompt
Factory Default
Enable
To exit voice configuration menu and get back to stand-
by mode, rotate the Jog Dial until you hear a voice
prompt, "Exit configuration", and tap the Phone
Button to confirm. Taping the Jog Dial is not available
for this setting.
SPH10H-FM
"Delete all pairings"
N/A
Tap the Phone Button
"Exit configuration"
N/A
Tap the Phone Button
19